Business

Add as a preferred source on Google

Adani Begins 91.2-Meter Blade Production for Five-Megawatt Turbine

Adani says WindGuard certified the MWL185-5.0 MW platform, while the certifier’s reference page lists its type-certification work as ongoing.

Updated 2 min read
A turbine blade rests on a production cradle inside a factory in Mundra, Gujarat. (AI-generated image / EconoTimes)
A turbine blade rests on a production cradle inside a factory in Mundra, Gujarat. (AI-generated image / EconoTimes)

Adani New Industries Limited began making 91.2-meter wind turbine blades in Gujarat for a five-megawatt model it says is designed to capture more energy at lower-wind sites, extending local production of large onshore equipment.

Adani, a wholly owned subsidiary of Adani Enterprises, said Nov. 16 that production had started at Mundra. The facility already makes 78.6- and 80.5-meter blades, according to the company. The new blades are for its MWL185-5.0 MW turbine platform. Adani said making blades at this scale required changes to design, materials engineering, manufacturing precision and handling.

The company lists the turbine at five megawatts, with a 185-meter rotor and a 140-meter hub; the rotor sweeps nearly 26,600 square meters. Adani says the design may improve energy capture in low- and moderate-wind conditions, potentially making more locations viable for wind projects. The announcement did not name a buyer or a project using the turbine.

Adani said WindGuard Certification GmbH certified the platform after prototype testing in Mundra. It says the certification confirms conformity with the IEC 61400 series of standards and allows serial production to proceed. WindGuard’s reference page gives a different status for the MWL-185-5.0MW: type-certification work under IS/IEC 61400-22 is marked “ongoing.” The entry is undated.

Adani described its 91.2-meter blade as India’s longest. In its FY26 annual report, Adani Enterprises lists a 91.5-meter blade for a five-megawatt turbine with a 185-meter rotor.

The Ministry of New and Renewable Energy (MNRE) approved-model list dated Aug. 20, 2026, contains no MWL-185 entry. That list predates the Nov. 16 production announcement.

Adani unveiled the MWL 185–5.0 MW turbine at Windergy 2025 in Chennai and said it was developed with Germany’s Wind To Energy. The company described the model as intended for low- to medium-wind conditions. Adani Wind CEO Milind Kulkarni said larger blades and higher-capacity turbines can increase energy capture where wind speeds are lower.

Related articles

View all
Business

Senvion announces highly competitive new wind turbines

Denver/Montreal/Hamburg, May 23, 2017 -- Senvion, a leading global manufacturer of wind turbines, presents the Senvion 3.6M140 at this year’s AWEA Windpower conference. The company is also announcing the adaptation of it…