Vacuum Check Valves Feature Low Cracking Pressure and One Piece Shell

HUDSON, Mass., March 07, 2017 -- ANVER Corporation announces a line of CheckVac Valves specifically designed for versatility, and working on most mid vacuum applications where vacuum loss prevention is required. These high quality CheckVac Valves feature a low 0.17 psi cracking pressure with flow rates up to 63 CV and a one piece shell to eliminate leaks. Unlike pressure check valves, these CheckVac Valves optimize system performance by not wasting the pump’s power opening stiffer springs; resulting in up to four times better flow.  These are designed for vacuum clamping, lifting and holding applications.

VACUUM CHECK VALVES FEATURE LOW CRACKING PRESSURE AND ONE PIECE SHELL.

A photo accompanying this announcement is available at http://www.globenewswire.com/NewsRoom/AttachmentNg/196cf71c-7a5c-40e4-996d-7f1ffa056497

Allowing the use of smaller vacuum pumps in many applications, ANVER CheckVac Valves are made from a leak-free, seamless, one-piece anodized aluminum body with a smooth bore and have a plastic valve element with a specially tempered stainless steel spring and an O-ring seal.  The precision internal plastic valve is spring loaded with stainless steel springs to eliminate corrosion from water contamination. Designed to operate in any orientation, they are offered in 1/4” through 2” NPT sizes.

ANVER CheckVac Valves are priced depending upon size. Visit http://anver.com/vacuum-components/vacuum-valves/valve-check/.

For more information contact:

ANVER Corporation
36 Parmenter Rd.
Hudson, MA 01749
Jay J. Osmecki, Components Group Sales Manager
Phone: (800) 654-3500   FAX (978) 568-1570
e-mail: [email protected]
www.anver.com